Line laser INSTRUMAX CONSTRUCTOR 4D GREEN

The INSTRUMAX CONSTRUCTOR 4D GREEN line laser is a precision with green laser lines designed for indoor and outdoor use. CONSTRUCTOR 4D GREEN builds 4 vertical lines (4V), 1 horizontal (H), plumb point (D). Additionally, there is a laser dot on the horizontal line.

SELECTION OF LASER LINES. Laser lines can be turned off depending on need or to save battery power. The presence of a laser plumb line allows you to more accurately set the laser level above the required point (or below the point of intersection of vertical lines). Intersecting vertical lines help to quickly mark the position of walls or partitions when dividing large rooms. For example, when building a separate dressing room.

LASER POINT. A laser dot is made on a horizontal line. In bright ambient light or at great distances, the laser line is almost invisible. For marking in such conditions, a laser dot on a horizontal line allows you to get the job done. By rotating the device body, the laser point can be easily moved around the perimeter and checked for horizontalness.

OPERATING MODE WITH THE RECEIVER. The operating range of the device is 40m, allowing it to be used in large rooms. The operation mode with the laser radiation receiver, supplied as an option, will allow you to work in bright light and at a greater distance (up to 70 meters).

PENDULUM LOCK. The self-leveling pendulum is equipped with a lock to protect against damage during transportation. When the tilt angle is exceeded ±3°, beyond the leveling range, the laser beam flashes and a warning sound is given, which will protect against marking errors.

MICROMETRIC SCREW. The laser level is equipped with a rotating base. The base has a 360° degree scale. It helps control the angle of rotation of the vertical beams. The vertical beam is aimed in the desired direction and at the required point using a micrometer screw. This allows you to direct the vertical line much more conveniently and accurately than with levels without a dial (rotating base).

CHARGER. The laser level can be powered by a charger (included in the kit). If the battery charge is zero, you can connect the device to a household electrical outlet via a charger and continue working.

TRANSPORT CASE. For storage and transportation of the laser level and accessories, the entire set is placed in a transport case. There is a special place for each element in the case.

LASER GLASSES. Laser glasses are useful when working in brightly lit areas at short distances, when the beam is barely visible. With these glasses, the beam is clearly visible on any surface.

The INSTRUMAX CONSTRUCTOR 4D GREEN line laser is an excellent choice for marking work. Leveling surfaces, laying electrical wiring, installing doors and windows, marking plasterboard structures and suspended ceilings, building walls and partitions, and interior decoration work can be done quickly and efficiently with the INSTRUMAX CONSTRUCTOR 4D GREEN laser level.