Line laser INSTRUMAX 360

Line laser INSTRUMAX 360 – thanks to a special emitter, the horizontal beam is projected at 360°. Ideal for repair work in small spaces, and when using the receiver mode and outdoors.

Convenient marking. The level projects horizontal 360º and vertical lines. There is no longer any need to rotate the line laser when marking horizontally. The horizontal beam is visible along the entire perimeter. You just need to change the installation height. When turning on the vertical line, a projection intersecting at an angle of 90º is obtained (laser cross). Laser lines can be turned off one by one, leaving only what is necessary for operation and saving battery power.

Receiver operation mode. For working in bright light, outdoors, there is a mode for working with the receiver. When this mode is turned on, the marking distance increases from 20 meters to 70.

Mounting thread. The INSTRUMAX 360 can be mounted to a tripod or wall mount using a 1/4" threaded connection. The thread is located on the bottom of the device.

Work at an angle. In this mode, you can tilt the device to any angle. It is enough to turn off the sound alarm. In this case, laser beams will be projected at the required angle.

Works from a charger. INSTRUMAX 360 can be powered by regular batteries, rechargeable batteries or a charger. If the battery or batteries are completely discharged, the level can be operated from a charger connected to the household network. When connecting the charger, there must be no non-rechargeable batteries in the battery compartment.

INSTRUMAX 360 is ideal for construction or renovation work for leveling when laying ceramic tiles or other coverings, wallpapering or borders, etc.